Print Page | Close Window

Scope barrel/objective threads striped

Printed From: OpticsTalk by SWFA, Inc.
Category: Scopes
Forum Name: Rifle Scopes
Forum Description: Centerfire long gun scopes
URL: http://www.opticstalk.com/forum_posts.asp?TID=42510
Printed Date: March/28/2024 at 17:00
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Scope barrel/objective threads striped
Posted By: brbob1
Subject: Scope barrel/objective threads striped
Date Posted: December/22/2015 at 20:46

I picked up and early Japanese made Bushnell Banner 4x32 off eBay. Found that the threads holding the object lens housing and the tube are stripped. Any ideas on how to repair so that the scope will still function correctly. I plan to use it on a 22lr gun so it won't be subjected to a lot of recoil.  The scope is also stamped with BL. I understand that some early Bushnell scopes were made by Bausch and Lomb. Could mine be one of those. The optics look extremely sharp and bright.

I also need a turret cap if anyone happens to have one laying around LOL:)

Thanks.



-------------
brbob



Replies:
Posted By: Sgt. D
Date Posted: December/22/2015 at 21:26

It is a bad sign all around but if you want to try to get some use out of it go to Lowe's and get some red lock-tite and see if that will keep it together. If that doesn't hold scuff both sets of remaining threads with some 120 grit sand paper (lightly) and mix a dab of JB weld and smear alittle on the tube and thread it to where you want it. If that doesn't hold drill a 1/8 hole in it and use a pop rivet. It is likely gonna fog up regardless. Or you could send it to Bushnell as is and who knows, they may send you a referb. Even if it is a Bausch and Lomb ( likely not) I hope you don't have much in it.

Keep an eye open at some yard sales, You might get lucky and find something similar and have enough to make one good one out of the two.

Good Luck!

Welcome to the OT!



-------------
Take care of Soldiers, Show em how its done and do it with em, Run to the Fight & and hold your ground! I die my men go home! If you're a NCO and this ain't you. GET OUT! GOD BLESS AMERICA!


Posted By: brbob1
Date Posted: December/22/2015 at 21:34
Thanks, I'll try the JB weld only paid $9.95. But anything is too much for a busted scope. Cost me a much to ship back as I paid for it.

-------------
brbob



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net