IMR 4007 SSC

i asked that question months ago and got no response

OLRVRAT...........................From what I understand, this powder is suppose to work extremely well for the 300 WSM`s. Comparable velocities using slower burners, can be achieved using about 10 grains less per round with the 4007SSC!!! The burn rate for the 4007 is between IMR4320 and 4350................I ran across this awhile back! Go to the Nosler web site forum. Under the "reloading section" click on page 6. Then scroll down to the topic "IMR 4007" started by "quitgary"....Then scroll down to steve4102`s post. Click on that link....................That will take you to another forum where you can read a shooters "Sam Spade`s" comments after using the 4007 in his 300 WSM. As he was working up the charge levels for his loads, ALL his groups in each level were extremely tight!! In each group, ALL the bullet holes were touching each other at 100 yards! He stopped at a 60 gr. charge, but indicated that there were no pressure problems at that level..........My dealer has no 4007 now, but that is going to be my next powder to try for my 300 WSM compact!! Should burn more efficiently in my 16.5" barrel..........  

Thanks . I checked the Nosler forum out, looks like some good reading there also. Maybe keep me off gunbroker, save me some money!